#Shutdown activepresenter after download how to
#Shutdown activepresenter after download software

For information on how to configure CTS for the first time, see the following documentation: See the 'Testing Speakers' section.įigure 11-1 shows an example of the Cisco TelePresence System administration tools available to assist you with troubleshooting tasks.ĬTS initial setup is also performed using the Hardware Setup fields. Note You must test the speakers before testing the microphones because the microphone test depends on speakers that are functioning properly. If the displays are showing the correct images, you can proceed to testing the cameras, speakers, and microphones, as needed. Verify that the displays work by using the Hardware Setup > Displays tests in this section.Ģ. All of the Cisco TelePresence System Administration interface Hardware Setup features require the use of the displays in the meeting room. You can manage and test the following Cisco TelePresence System components:īefore you begin testing and troubleshooting your system, check the system displays. Where to Go Next Managing CTS 3010 and CTS 3210 Hardware Setup.Proceed to the following sections to troubleshoot system components: Note You cannot perform diagnostics during an active Cisco TelePresence system call. Click Yes to accept all security connection messages. Enter the IP address in your laptop's browser window.Ĥ. – From the Cisco TelePresence Touch 12 tap the following:ģ. Note If you have more options on your phone, touch the more softkey until you reach the end of the selections. – From the CTS Cisco Unified IP phone touch the following softkeys: Obtain your IP address in one of the following ways:

#Shutdown activepresenter after download software

This chapter contains information about troubleshooting hardware and software on the following CTS devices:ġ. You may want to periodically test system components using the hardware and software tests available in the Cisco TelePresence System (CTS) Administration Troubleshooting window. Troubleshooting the CTS 3010 and CTS 3210 Troubleshooting the Presentation Display.Testing the External Presentation Display.Testing Microphones on the CTS 3010 and CTS 3210.Testing the CTS 3010 and CTS 3210 Cameras.Managing CTS 3010 and CTS 3210 Hardware Setup.